Preventive maintenance of industrial doors is crucial due to the fact they are subjected to heavy and frequent use. The replacement of parts vulnerable to wear and tear is therefore a huge advantage for the reliable functioning and long service life.
Maintenance of the door leaf and the running rails attached to the building is of course essential for trouble-free operation, but the "small" parts of industrial doors are equally important, such as seals, cables or switches. These are known as the “wearing components” of a door system and should therefore be checked regularly and replaced if necessary.
In most cases, maintaining an industrial door should not involve major repairs or even replacing the entire door. Quite the opposite in fact. These time-consuming and costly measures can be avoided simply by replacing wearing parts and checking them regularly.
Professionally performed maintenance prevents malfunctions on industrial doors and therefore interruption in ongoing operations. Our professional maintenance service includes the statutory door inspections and any required adjustment. This guarantees service at the highest level. With planned, regular maintenance, you can make provisions in good time to avoid unexpected failures of your industrial doors.
Even though good-quality industrial doors are very strong and durable, they are not immune to wear and tear. Age, usage or exposure to tough environments and weather conditions are all factors. With regular checks, these signs of wear and tear can be detected early and eliminated through appropriate maintenance measures.
Even the smallest interruption can bring the entire door system to a standstill for a short time. If wearing components on industrial doors are not replaced in time, significantly longer downtime and disruption can occur later on. Not only does this increase the time required for repair, but impacts the financial aspects of your business.
Important maintenance measures on industrial doors include replacing the seals, the spiral cable and the pneumatic switch. By doing this, the industrial door, machinery, equipment and people in the immediate area remain protected.
Replacing bottom, side and corner seals is an important preventive maintenance measure for industrial doors. Seals fulfill two important functions: they effectively prevent wind, water, dirt and insects from entering through the door into the interior environment. Secondly, they reduce energy loss from the building. Side seals in particular ensure that the door runs optimally and makes as little noise as possible.
The floor profile represents the contact point between the door and the floor, cushioning the impact when closing, which not only protects the door leaf from damage, but also any persons or objects from impact and related injuries.
The engine and gearbox should also be checked regularly for noise and leaks.
Avoid costly energy losses by having the seals on the doors replaced at an early stage.
In addition to the seals, the spiral cable and the pneumatic switch are also important parts of the safety strip on industrial doors. Just like the seals, signs of wear and tear can occur here, which indicate that replacement is necessary.
Any corrosion on the contacts of the pneumatic switch should be prevented at an early stage, otherwise there is the risk of system failure or accident.
Excessive abrasion, twisting or stretching, and age-related hardening are the most common causes of wear and tear on the coiled cable. These are clear signs that a replacement is urgently needed.
Failure to replace these parts can result in problems closing the door. Since the safety edge is checked automatically with every closing cycle, malfunctions in the pneumatic switch or the spiral cable have a direct impact on smooth functionality.
Remember that timely renewal always guarantees a trouble-free workflow in your company.
Did you know that failing to comply with legal requirements can be costly, subject to penalties, and put your employees at risk?
Professional maintenance is your best insurance. Request a quote now to make sure your doors stay safe, compliant, and efficient.
