Crawford teledock isodock

Crawford DL6020TI teledock isodock
Crawford DL6020TI teledock isodock
Crawford DL6020TI teledock isodock
Crawford DL6020TI teledock isodock
Crawford teledock isodock at Nippon, Holland
Crawford teledock isodock at Nippon, Holland

Minimize energy losses in cold storage facilities with the Crawford teledock isodock

The teledock isodock is designed especially for cold storage facilities to guarantee unbroken temperature chains during loading and unloading. In the closed position it is very well sealed off from below, preventing cold or hot air access. This construction enables energy savings of up to 75% compared to conventional docking systems.

Besides that, the teledock isodock is designed in such a way that impact forces from docking vehicles are absorbed by the building floor. Damage to buildings are avoided through buffers. The frost-proof foundation is separated from the building floor just by a gap for housing the sectional door – not as a separate building construction. Complicated building arrangements can be avoided. 

The innovative and unique ASSA ABLOY 950 series docking control system offers perfect control of the dock leveler, dock shelter and door, all in one control unit. A few self-explaining buttons make the system easy to operate. Separate steering units or complex wiring are no longer needed.

Crawford DL6020TI teledock isodock 

Crawford DL6020TI teledock isodock is an energy-saving telescopic lip-dock leveller designed for cold storage facilities. It is delivered as a premounted, ready-to-install unit – including the bottom insulation panel. The unit is simply lifted into the prepared pit.

BIM objects

Download the Crawford teledock isodock leveler as a BIM object

 

In closed position it is very well sealed off from below, preventing cold or hot air access. 

Technical description

Crawford DL6020TI teledock isodock

  • Nominal length: 2000, 2500, 3000 mm
  • Nominal width: 2000, 2200 mm
  • Load capacit:y 60 kN (6 tonnes)
  • Vertical working range: Rise above dock up to 520 mm, Fall below dock down to 460 mm
  • Platform tear-plate thickness: 8/10 mm
  • Max. point load leveller platform: 6,5 N / mm² (8 mm tear plate)
  • Insulation thickness: 40 mm
  • Lip material & length: steel or aluminium, 1000 mm
  • Lip option: tapered lip / Retracting tongues
  • Control unit protection: class IP 54
  • Temperature range hydraulic oil: -20°C - +60°C
  • Magnetic valves: 24 V / DC 18W S1
  • Nominal voltage: 400V 3-phase
  • Nominal motor power: 1,5 kW
  • European standard: EN 1398 Dock levelers
Contact us